ElectrIQ AIRFLEX 15 User Manual download pdf (Page 10)

Page 10 of 17

COOLING

On very warm days we recommend programming the unit to start early, before direct sun

hits the room to cool and set it to a comfortable 20-22

°C

ElectrIQ Airflex 15 is a self-evaporating air conditioner, so under normal use there will be no

need to empty the internal tank. However if there is a high amount of humidity in the air or

the unit is not vented correctly water will be collected in the internal tank. Also if

the unit

operates in cooling mode for a longer period and especially at a time of year with high

air

humidity, the

internal

condens

ation tank may fill and error E4 will be displayed on the LED panel

and unit will require emptying as per user manual. In such instances is recommended to use the

permanent drainage.

COOLING WHEN AC IS PLACED INDOOR (NORMAL OPERATION)

The unit is placed in the room to be cooled.

Connect the hot air hose as displayed in the illustration; the air hose will expel the hot

air from the room outside while the front grills produce cold air.

The hose can be vented v

ia a tilted

window, a door or wall aperture.

Make sure that no warm air

from

outside

can enter the room.

Set the function to „COOLING“. Set the target temperature using the temperature

control. The temperature range is between 17°C and 30°C target temperature. The unit

must only be used in an ambient temperature of maximum 32°C.

Note: After switching on compressor only starts after the 3 minutes. For full cooling

effect please allow a further 10 minutes of operation.

COOLING WHEN AC IS PLACED OUTDOOR

Connect the cold air hose as displayed in the illustration.

Connect the air hose at the back of the unit after exchanging vents.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

ElectrIQ AIRFLEX 15 User Manual Page 10